| Specification | Description |
|---|---|
| THE CUT-TO-LENGTH LINE CONSISTS OF: | |
| 1) B & K COIL CAR | |
| COIL WEIGHT | 20,000 LB.S |
| COIL WIDTH | 48" |
| COIL O.D. | 48" |
| CONSISTS OF A HYDRAULICALLY OPERATED LIFT PLATFORM & A HYDRAULICALLY | |
| ACTUATED TRAVERSE. | |
| 2) B & K UNCOILER | |
| MAX. COIL WEIGHT | 20,000 LBS. |
| MAX. COIL WIDTH | 48" |
| COIL O.D. | 60" |
| COIL I.D. | 20" & 24" |
| THE UNCOILER MADREL HAS A WEDGE TYPE EXPANDING HEAD TO GRIP THE INSIDE | |
| OF THE COIL WHILE UNWINDING. THE MANDREL IS MOUNTED IN GREASE | |
| LUBRICATED ANTI-FRICTION BEARINGS. IT IS DRIVEN BY A GEARMOTOR | |
| THROUGH AN AIT CLUTCH & A CHAIN & SPROCKET SYSTEM. | |
| 3) B & K EDGE TRIMER (NOT HOOKED UP TO SYSTEM AT THE MOMENT) | |
| ARBOR DIAMETER | 5" |
| PINCH ROLL DIMENSIONS | 6" DIA. X 54" |
| KNIFE DIAMETER | 9-1/2" |
| 4) B & K, 5-11 ROLL LEVELLER | |
| MATERIAL | MILD STEEL |
| MATERIAL GAUGE | .120 - .030" |
| STRIP WIDTH | 48" MAX. |
| LINE SPEED | 125 FPM (MAX.) |
| LEVELLER ROLLS | 2.5" DIA. X 54" FACE |
| PINCH ROLLS | 6" DIA. X 54" FACE |
| THE LEVELLER HAS 11 BACKED-UP WORK ROLLS, SIX IN A FICED POSITION AND | |
| FIVE IN AN ADJUSTABLE HEAD. THE WORK ROLLS ARE STEEL, CHROME PLATED & | |
| FINISH GROUD. ALL WORK ROLLS & PINCH ROLLS ARE DRIVEN BY A GEAR TRAIN | |
| WHICH IN TURN IS DRIVEN BY A 25HP AC MOTOR THROUGH A REDUCER & VARIABL | |
| BELT DRIVE SYSTEM. THE ADJUSTABLE HEAD IS RAISED & LOWERED BY FOUR | |
| JACKS. THE ENTRY JACKS ARE ADJUSTED BY GEAR MOTOR, THE EXIT JACKS BY | |
| A SECOND GEAR MOTOR. | |
| 5) B & K HUMP TABLE | |
| THE HUMP TABLE IS MOUNTED BETWEEN THE LEVELLER & THE SHEAR. IT IS | |
| SHAPED TO INITIATE THE HUMPING ACTION OF THE STRIP DURING THE TIME THE | |
| MATERIAL IS STOPPED FOR SHEARING. | |
| 6) FAMCO SHEAR | |
| 7) STOP & CONVEYOR | |
| CONVEYOR LENGTH | 18" |
| CONVEYOR SPEED | 75 FPM |
| THE MEASURING SYSTEM IS MOUNTED ON THE CONVEYOR & IS ADJUSTABLE FOR | |
| SHEET LENGTH BY MEANS OF A PEGGED ROLLER CHAIN, SPROCKET & HANDWHEEL, | |
| IT INCLUDES A FLAG OPERATED LIMIT SWITCH & A PNEUMATIC POSITIVE STOP. | |
| 8) STACKING BIN |
Trader Machinery Inc.
63 Maplecrete Rd.
Concord, Ontario, Canada L4K 1A5
(905) 669-7507
(905) 669-7512
trader@tradermachinery.com